Simrad ES60 - DATASHEET REV A, Руководство по установке

Страница: 35 / 162

Installation procedures
ES60 Marine Computer installation
The ES60 Marine Computer is an industrial computer. It is small,
rugged, and contains no moving parts. This means that fans,
hard disks and CD drives are omitted. The computer provides
two ethernet sockets, four RS-232 serial lines and several USB
connectors. The hard disk is replaced with a commercial 4 Gb
fl ash disk.
The ES60 Marine Computer is easily mounted with the brackets
supplied with the unit. A small external power supply is
provided, and must be placed near the computer.
Preparations
Two brackets and eight bolts enclosed. Mount the two brackets
at the bottom of the computer.
Procedure
1
Locate the most convenient location for the computer.
Make sure that you can access both the rear and front side
of the computer after it has been installed. In order to allow
for future maintenance, mount the computer with its rear
panel available for immediate access.
2
Observe the outline dimension drawing. Mark the location
of the six holes provided on the two brackets.
3
Mount the unit using six bolts or screws.
4
When you install the cabling, make sure that the various
adapter and cables are secured, and able to withstand
vibration and the movements of the vessel.
Related topics
ES60 Marine Computer specifications
on page 108
304699/A
33