Simrad ES60 - DATASHEET REV A, Руководство по установке

Страница: 70 / 162

Simrad ES60
Single beam, normal power transducer
This is the termination of the transducer cable from a single
frequency, single beam transducer to the transducer socket on the
General Purpose Transceiver Unit (GPT). The other end of the
cable is permanently fi xed to the transducer.
Normal power output (1 kW) is achieved when the GPT is
equipped with a single transmitter board.
M
E
F
J
H
D
C
K
L
A
B
N
Transducer
cable
D
C
Junction Box (1:1)
(Optional)
GPT Transducer
socket
Screen
Drain wire
Connect to plug housing
W802-1
Rev.E
Single frequency, single beam, normal power termination
If you need to splice the transducer cable, it is very important to
use the correct cable, and to avoid ground loops. We strongly
recommend the use of a junction box. We also recommend that
you install the transducer cable in a steel conduit.
Related topics
Cable splicing
on page 140
Steel conduit
on page 140
GPT Transducer plug connection
on page 105
68
304699/A