Installation Instructions Document No. 466-1574
5
Door/Window Sensor
For intrusion protection, install Door/Window sen-
sors on all ground-floor doors and windows. At a min-
imum, install them in the following locations:
•
All easily accessible exterior doors and windows.
•
Interior doors leading into the garage.
•
Doors to areas containing valuables such as cabi-
nets and closets.
KeyChain Touchpad
The KeyChain Touchpad enables you to turn the sys-
tem on and off from right outside the home or to turn
on the siren and to call the central monitoring station
if there is an emergency. If you have Lamp Modules,
you can use the KeyChain Touchpad to turn all sys-
tem controlled lights on and off.
Remote Handheld Touchpad
The Remote Handheld Touchpad enables you to turn
the system on and off while in the home, turn lights
controlled by the system on and off (all or individual
lights), or turn on a system siren and call the central
monitoring station if there is a non-medical emergen-
cy. The Remote Handheld Touchpad will report an
alarm type specific to its sensor type (see Table 3 on
page 7 for sensor and siren types).
Touchtalk 2-Way RF Touchpad*
The wall-mounted wireless Touchtalk 2-Way RF
Touchpad enables you to arm and disarm the system
while in the home, turn system controlled lights on
and off (all or individual lights), turn on a system si-
ren, or call the central monitoring station if there is a
non-medical emergency. The Touchtalk 2-Way RF
Touchpad will report an alarm type specific to its sen-
sor type (see Table 3 on page 7 for sensor and siren
types). It annunciates status beeps and Control Panel
voice feedback.
Note: Use of the Touchtalk 2-Way RF Touchpad has not
been investigated by UL.
Indoor Motion Sensor
Indoor Motion Sensors are ideal whenever it is not
practical to install Door/Window sensors on every
opening. Identify areas where an intruder is likely to
walk. Large areas in an open floor plan, downstairs
family rooms, and hallways are candidates for Indoor
Motion Sensors. Indoor Motion Sensors are not suit-
able for rooms where pets can enter. Indoor motion
sensors can also be used to sound chimes, but cannot
be used for intrusion protection and as a chime sensor
simultaneously.
Outdoor Motion Sensor
Use Outdoor Motion Sensors to identify motion in a
protected outdoor area. Detected motion in this pro-
tected area can sound chimes or turn on outside lights.
Do not use Outdoor Motion Sensors for intrusion pro-
tection.
Smoke Sensor
Smoke Sensors can provide fire alert protection by
causing the alarm to sound throughout the house. You
can add smoke sensors near sleeping areas and other
floors of the house. Avoid areas which could have
some smoke or exhaust such as attics, kitchens, above
fireplaces, dusty locations, garages, and areas with
temperature extremes. In these areas you may want to
install Rate-of-Rise sensors to detect extreme temper-
ature changes. See the instructions packaged with the
Smoke Sensor for complete placement information.
Refer to the diagram on the next page for specific
placement of Smoke Sensors.
ITI ToolBox
®
The ITI ToolBox is a Windows
®
-based program that
saves you time by simplifying Control Panel pro-
gramming. Using only a PC, a modem, and a standard
telephone line, ToolBox makes creating new custom-
er accounts and updating the panel settings of existing
customers simple and quick. See the ITI ToolBox
manual and ToolBox’s on-line help for instructions to
use ToolBox for programming this Control Panel.
The ITI ToolBox has not been investigated by UL and
should not be used on UL Listed Systems.
CAUTION!: The Downloader code (option 09) should al-
ways be changed to avoid competitor theft.
ITI CS-5000 Receiver
The CS-5000 Receiver is used to monitor this security
system.
* = Not Available with Basic Model
