Installation Instructions Document No. 466-1574
29
your programming.
To delete a sensor-activated light:
1. Press Delete from the Start menu.
2. Press Light Control from the Main menu.
3. Press Unit # until you hear the unit number you
want to delete.
4. Press Sensors from the control menu until you
hear the one you want to delete.
5. Press DONE. The system confirms your pro-
gramming.
To delete a time-activated light:
1. Press Delete from the Start menu.
2. Press Light Control from the Main menu.
3. Press Unit # until you hear the unit number you
want to delete.
4. Press Time from the control menu.
Programming Options
Use Table 18 on page 19, which was filled out during
the system planning, to help program options.
There are two ways to enter options. They are as fol-
lows:
•
Press Add and press the Option # button until
you hear the option to be changed.
or--
•
Press Add and enter the option number you
want to program with the red numbered keys.
The following instructions use the second method.
To set system options 01 and 02:
1. Press Add from the Start menu.
2. Press Option # and 01 or 02 with the red num-
bered keys.
3. Press DONE.
To set system option 03:
1. Press Add from the Start menu.
2. Press Option # 03.
3. Press Hours and Minutes to set the time.
4. Press DONE.
To set system options 04, 05, and 06:
1. Press Add from the Start menu.
2. Press Option # and 04, 05, or 06.
3. Enter a phone number with the red numbered
keys. Press Test to enter a pause in the phone
number.
Note
: The phone number is automatically stored after
you’ve pressed 22 digits. You will not have to press DONE
to store the number. If the number is less than 22 digits,
then DONE must be pressed.
To set system option 07:
1. Press Add from the Start menu.
2. Press Option # 07.
3. Enter the account number.
4. Press DONE.
To set system option 08:
1. Press Add from the Start menu.
2. Press Option # 08.
3. Press DONE.
To set system option 09:
1. Press Add from the Start menu.
2. Press Option # 09.
3. Enter the downloader code.
4. Press DONE.
To set system options 10 & 11:
1. Press Add from the Start menu.
2. Press Option # 10 or 11.
3. Enter the delay times in seconds (3 digits must
be entered).
To set system options 12 & 13:
1. Press Add from the Start menu.
2. Press Option # and 12 or 13.
3. Enter phone mod number.
To set system option 14:
1. Press Add from the Start menu.
2. Press Option # 14.
3. Press DONE.
To set system option 15:
1. Press Add from the Start menu.
2. Press Option # 15.
3. Enter the no activity time out (2 digits must be
entered).
To set system option 16:
1. Press Add from the Start menu.
2. Press Option # 16.
3. Enter the number of days between each auto
