Installation Instructions Document No. 466-1574
13
Table 8 Panel Piezo Beeps
Option 03: Latchkey
Add programs the Latchkey time. If Latchkey is en-
abled when the Control Panel is armed and the Con-
trol Panel is not disarmed by the preprogrammed
time, the Control Panel will call in a Latchkey alarm
at the programmed time.
The system clock must be set for Latchkey to func-
tion.
Delete turns off this option and Latchkey cannot be
enabled when the Control Panel is armed.
Option 04: Primary Phone Number
Add programs the primary phone number to be called
when there is an alarm. The phone number will call
the central station.
Delete removes the primary phone number.
Option 05: Secondary Phone Number
Add and Delete function the same as they do for the
primary phone number. This number can be to a nu-
meric pager or a central station. When using it to call
a numeric pager, program this phone number with 2
pauses (press the test button to program a pause) at the
end of the number. Some pagers may require 3 or 4
additional pauses be appended to the phone number.
Set Phone Mod 2 (option 13) to 8 or 9. The Control
Panel will call a numeric pager twice for each report.
Pagers that require the Control Panel to dial more than
22 digits will not work. Silent alarms report to a pager
as an intrusion alarm. See Table 17 on page 17 for
more reporting information.
Option 06: Downloader Phone Number
Programs the ITI ToolBox Downloader telephone
number.
Add and Delete function the same as they do for the
primary phone number.
Option 07: Account Number
Add programs the account number.
Delete resets it to 00000.
Option 08: Phone Lock
Add enables phone lock. Options 04, 05, 06, 08, 09,
12, and 13 will not be cleared if the system memory is
cleared and phone lock is on.
Delete disables phone lock.
Activity
Beep Response
ARM Doors & Win-
dows
Exit delay beeps sound 2 times when you arm and 2 times at the end of the delay time;
Entry delay beeps sound 2 times every 5 seconds and 2 times per second during the last 10
seconds
ARM Motion Sensors
Exit delay beeps sound 3 times when you arm and 3 times at the end of the delay time;
Entry delay beeps sound 3 times every 5 seconds and 3 times per second during the last 10
seconds
ARM Doors/Win-
dows & Motion Sen-
sors
Exit delay beeps sound 4 times when you arm and 4 times at the end of the delay time;
Entry delay beeps sound 4 times every 5 seconds and 4 times per second during the last 10
seconds
DISARM
1 beep
CHIME DOORS
2 beeps (when programmed)
CHIME SPECIAL
MOTION
3 beeps (when programmed)
Trouble Beeps
6 beeps every minute. Press SYSTEM STATUS button to stop beeps for 4 hours
No Activity
20 beeps every minute for 5 minutes (when programmed)
