15
GB
Initial Operation / Cleaning and maintenance / Service
18
Q
Descaling the Base of the
Appliance / Water Tank
ATTENTION! RISK OF INJURY!
Always switch
the appliance off and pull the mains
18
plug prior
to all occupations with the electrical appliance.
ATTENTION! HAZARD OF BURNS!
Let the
steamer completely cool down before descaling it.
Descale the base of the appliance / water
tank
10
regularly in order to maintain the steam
generation and to extend the lifespan of the ap-
pliance. The amount of limescale deposit caused
will depend on the water hardness type. Descale
the tank
10
after every seventh to tenth use.
Slight and persistent scale:
For slight scale, use a cloth moistened with
vinegar.
Wipe the scaled areas with it.
Use correspondingly more vinegar for persistent
scale.
Then rinse and dry the appliance thoroughly.
Descale the base of the appliance /
water tank:
Place the turbo ring
8
with the upside down
on the heating element
11
(larger side faces
upwards).
Fill the base of the appliance / water tank
10
with cold water up to the MAX mark
19
.
Fill the inside of the turbo ring
8
with usual
decalcifier.
Do not heat the appliance.
Leave the appliance to descale overnight.
Pour the decalcifier out and rinse the appliance
thoroughly.
Then wipe and dry the appliance thoroughly.
Q
Cleaning and maintenance
ATTENTION! HAZARD OF INJURY!
Always switch the appliance off and pull the mains
plug
18
prior to all occupations with the appliance.
ATTENTION! HAZARD OF BURNS!
Let the steamer completely cool down before
cleaning it.
CAUTION! RISK OF DAMAGE TO THE
PRODUCT!
Do not use any aggressive cleaning
materials, such as scouring powder, scouring pads,
steel wool, washing soda or bleach. They could
damage the housing surface.
Clean the steamer regularly, best after every use.
Do not at all immerse the appliance in water.
Wipe out the base of the appliance
10
with a
damp cloth.
Clean all the demountable parts in hot water
with a little detergent using a washing-up brush.
Then rinse all the parts thoroughly and dry
them carefully.
Q
Service
Have your device repaired
at the service centre or by qualified
specialist personnel using original
manufacturer parts only.
This will ensure
that your device remains safe to use.
If the plug or lead needs
to be replaced, always have the
replacement carried out by the manu-
facturer or its service centre.
This will
ensure that your device remains safe to use.