1
1
1
1
600B696/03
INSTALLATION AND OPERATING GUIDE
For
Model 805
Heat-Glo
&
Alsace
Electric Heaters
Thank you for choosing Valor
All Valor heaters are designed to meet the most stringent quality, performance and safety requirements to provide our customers with
many years of trouble free service. This guide aims to improve your understanding and appreciation of your new Valor heater, by
providing simple and informative instructions to enable you to install it and to ensure that you benefit from the excellent performance
and features it has to offer.
Please read carefully before installing and using your heater.
Please keep your Guide in a safe place for future reference
If you require further assistance, the
Valor AdviceLine
will be pleased to help.
Please telephone
0345 626341
(local rates apply in the United Kingdom
)
or visit our website
www.valor.co.uk
.
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
It is important that the following safety instructions are followed
Always
✔
Install the heater in accordance with the instructions, if in doubt obtain expert advice.
✔
Make sure the electrical socket is accessible and located adjacent to, but not above the heater.
✔
Disconnect the heater from the electrical supply before carrying out cleaning, maintenance or replacing lamps.
✔
Make sure the heater is firmly secured to the fireplace opening to prevent the fire from being tipped over.
✔
Use a fireguard when young children and infirm persons can come into contact with the heater.
✔
Use genuine Valor spares.
Never
✖
Leave children unsupervised in a room where the heater in ON and unguarded.
✖
Obstruct or cover the fan outlet or force items into heater openings.
✖
Install or use the heater anywhere where water is in use, i.e. Bathrooms, Shower Rooms etc.
✖
Use aerosols on or around the heater.
✖
Route the mains supply cable under carpet etc.
✖
Install the heater close to curtains or combustible materials.
✖
Use the heater to dry clothes etc.
General
This heater is intended for use in a fireplace opening generally conforming to British Standard 1251 for a nominal 400mm (16 inch) or
450mm (18 inch) Fireplace. It may also be located in other fireplace openings or in a wooden surround, where the following
dimensions are available.
Width: 390 – 450mm
Height: 555 – 590mm
Depth: At least 75mm
Spacers and Wall Kits:
The heater is of a slim design and should suit most fireplace openings and fire surrounds, however there may be some applications that
require the need for either a spacer or flat wall kit.
These optional kits are obtainable either from the your heater supplier or direct from Valor Sales.
The kits are:
For 60mm (2.1/2”) Surround Rebate - 20mm Spacer Kit No. 05801R1
For Flat Wall (no recess) - 75mm Wall Kit No. 05801T1
