SII IP-6620, Руководство пользователя

Страница: 20 / 112

38 39
Loading the media Loading the media
Media orientation
<When the surface to be printed on is
at the outer side of the roll>
： printing surface ： printing surface
<When the surface to be printed on is
at the inner side of the roll>
6
Turn the media jack’s handle clockwise to
raise the media until the roll tube is aligned
with the media holder.
7
Insert the left media holder into the roll tube.
Notes
‹
Pay attention not to unwind the media or damage the
ends of the roll media when inserting it into the media
holder.
‹
Insert as far as it goes to secure the roll tube to the
media holder.
8
Turn the media jack’s handle counter-
clockwise to remove the jack. Then install it
to the right side of the roll.
9
Adjust the roll level using the media jack and
insert the right media holder into the roll the
same way as you did for the left side.
10
Turn the media jack’s handle counter-
clockwise to lower and remove the jack. Then
put the media jack and the media stand away.
Note
‹
If you leave the media jack or the media stand in place
under the roll media, the media may curl or be damaged
when back feeding it. Be sure to put them away.
11
Lift the pressure roller lever.
Note
‹
The pressure roller lever has three positions (low,
medium, and high). Always put the lever in the highest
position when loading the media.
Be
fo
re
p
rin
tin
g
Lo
adi
ng
the
m
edi
a
A
dj
us
tm
ent
M
ai
nt
enan
ce
A
dv
an
ce
d
op
er
ati
on
s
Trou
ble
sh
oo
tin
g
M
enu
tr
ee
Ap
pe
nd
ix