SII IP-6620, Руководство пользователя

Страница: 10 / 112

18 19
Other precautions
z
Media loses its color and quality with age. Check the media condition and select the media in the best
condition.
z Cut the media carefully, as paper dust may make irregular surfaces.
z
When adhesive-backed media is applied, some adhesive agent may be left on the platen, which may
cause a media jam. So clean the agent completely with a soft cloth moistened with the neutral detergent.
Available area on media
The available area on media in the scanning direction depends on the media width, the media edge guards
application, and the presence pf the color stripe. With the media edge guards and color stripe applied, the available
area decreases by 34.9 mm on the right and 10.0 mm on the left.
Color stripe :NO
Media edge guards :NO
Color stripe :YES
Media edge guards :NO
Color stripe :NO
Media edge guards :YES
Media width
Color stripe :YES
Color stripe :YES
32.6 mm
27.6 mm
10.0 mm 10.0 mm
10.0 mm
5.0 mm 5.0 mm
5.0 mm
Without mesh printing kit nor wide type media
edge guards for platen sheet
Printable area
Manual legend (Notational rules)
The notational rules used for explanation in this guide are as follows:
Marks
WARNING
‹
Boxes marked with a WARNING describe points of caution to avoid serious personal injury.
CAUTION
‹
Boxes marked with a CAUTION describe points of caution to avoid injury to yourself or damage to the printer.
TIP:
š
This mark indicates useful information, additional items and important operations.
Reference mark
This mark is followed by a reference section or page number.
Capping unit side and wiping unit side
To identify the printer’s right and left, this guide mentions the capping unit side and wiping unit side as follows.
Viewed from the printer’s front (media take-up side)
Maintenance area side Capping unit side
Viewed from the printer’s rear (media supply side)
Maintenance area side Capping unit side
A maintenance area is arranged. Capping unit is equipped.