SIGRIST AquaMaster Скачать руководство пользователя страница 9

Страница: 9 / 122

General user information

Instruction Manual AquaMaster

12745E/4

1.12

Dangers when not used properly

DANGER!

Operation when not used properly.

Improper use of the instrument can cause injuries to persons, process-related consequential
damage and damage to the instrument and its peripherals.

In the following cases the manufacturer cannot guarantee the protection of persons and the
instrument and therefore assumes no legal responsibility:



The instrument is used in a way not included in the described area of application.



The instrument is not properly mounted or set up.



The instrument is not installed and operated in accordance with the Instruction Manual.



The instrument has been operated with accessory parts which SIGRIST-PHOTOMETER
AG has not expressly recommended.



Improper changes to the instrument have been performed.



The instrument has not been operated within the specifications, in particular concerning
pressure and temperature.

1.13

Meaning of the safety symbols

All

danger symbols

used in this document are explained below:

DANGER!

Danger due to electrical shock that may result in serious bodily injury or death.

Non-observance of this danger warning may lead to electrical shocks and death.

EXPLOSION
HAZARD!

Danger due to explosion that may result in serious bodily injury or death.

Non-observance of this notice may cause explosions resulting in serious property damage
and death.

WARNING!

Warning about bodily injury or hazards to health with long-term effects.

Non-observance of this warning may lead to injuries with possible long-term effects.

CAUTION!

Notice about possible material damage.

Non-observance of this notice may cause material damage to the instrument and its
peripherals.

Содержание AquaMaster



























































































































Результаты поиска

Содержание AquaMaster

Отзывы:

Похожие инструкции для AquaMaster

Бренды по названию

Популярные бренды

SIGRIST AquaMaster, Инструкция по эксплуатации

Результаты поиска

Содержание AquaMaster

Отзывы:

Похожие инструкции для AquaMaster

Бренды по названию

Популярные бренды