Signode HSM 3000, Руководство по эксплуатации

Страница: 16 / 32

10.19
HSM 3000
16
6.2 MODE OF OPERATION „MANUAL“
OPERATING ELEMENTS
ACTIVITY/DESCRIPTION
Individual strapping head functions for head can be
performed manually:
– „ Strap Feed/Take-up “
– „
Strap Tensioning/Release
“
– „ Maintenance “ causes the pressure plate on the
strapping head to open. This facilitates strap residue
removal and strapping head cleaning.
– „
Step by Step
“ now the strapping cycle is gradually
carried out (Step operation).
– „
Reset
“
– „ Setup “ screen jump to parameter settings.
– „
Status
“ screen jump to status strappping head.
– „ Error “ screen jump to strapping head fault.
– (1) Push-button „
Exit
“ to return to the start screen.
Individual parameter settings can be performed manu-
ally, after entering a password (default password:
User: ADMIN, Password: 100):
– „
Friction welding time
“ Setting the welding time.
Depending on strap quality and strap thickness.
– „
Correction cool-down time
“ Here the cooling time
can be adjusted (+ 25% to -25% of characteristic).
Depending on the set welding temperature and the
strap tension.
– „
Strap advance
“ The feed speed can be set at three
different speeds.
– „
Slow strap feed in sealing head
“ When this
function is active, the strap feed speed is reduced to
prevent a break out of the strap.
– „ Strap return “ The take-up speed can be set at
three different speeds.
– „ Switching to strap back slowly “ This function
pulls the strap back at the same speed as with
„Strap return“ and after a adjustable time the speed
is reduced. This prevents the strap from hitting too
strong on delicate products.
– „
Tension level
“ Three different tension levels can be
selected. Depending on the used strap.
– Option: External selection for the strap tension.
– (2) Load factory settings (default settings).
– (3) Load previous settings (default settings) to strap-
ping head.
– (1) Push-button „
Exit
“ to return to the start screen.
On the status strapping head page the current position
in the strapping cycle is shown.
On the strapping head fault page, faults are displayed.
– (4) With the arrow keys, the errors can be called one
after the other.
– (5) With the arrow keys, the assemblies can be
selected.
1
4 5
2 3