manualshive.com logo in svg

Siemens SOMATOM Spirit, Руководство оператора, Страница: 62 / 484

Поделиться
Скачать
Siemens SOMATOM Spirit Скачать руководство пользователя страница 62

0.0

0.0

Information about Personal Safety

Safety

A.2-20

SOMATOM Spirit

0.0

Personnel

A.2

Anyone who has to be near the patient during scanning must 
observe the following precautions:

A.2

✧

Wear protective clothing (lead apron, and so on).

✧

Wear a PEN dosimeter and/or film badge.

✧

Stay in the zone shielded by the system, i.e., to the side of 
the gantry or behind a mobile protective wall.

Patients

A.2

The physician is responsible for protecting the patient from 
unnecessary radiation.

A.2

✧

Always use a gonadal shield, if possible.

✧

Use the pediatric mode for children.

✧

Use 

CARE

 features.

Reduction of the radiation 
load

A.2

You can avoid repeating a measurement and so reduce the radi-
ation load on the patient by taking certain precautions.

A.2

✧

Inform the patient sufficiently. The patient must move as 
little as possible during scanning and follow the breathing 
instructions (to avoid motion artifacts).

✧

Ask the patient to remove all jewelry, hair clips, and so on 
(to avoid metal artifacts).

✧

Make sure that the system is clean. Residual contrast 
medium can cause artifacts.

✧

Observe the calibration and maintenance instructions in 
the manual.

Содержание SOMATOM Spirit





































































































































































































































































































































































































































































































Отзывы:

Нет отзывов