Siemens SOMATOM Spirit Скачать руководство пользователя страница 446

Страница: 446 / 484

0.0

Constancy Test of the Monitor

Quality Assurance

F.6-6

SOMATOM Spirit

0.0

The individual tests

F.6

Performing the luminance
measurements

F.6

In this test the veiling luminance (environmental lighting) and
the maximum contrast are tested.

F.6

✧

Switch the monitor off and wait at least 30 seconds.

✧

Adjust then the room lighting to the operating conditions
using the dimmer switch.

✧

Measure veiling luminance Ls at the center of the screen
with the luminance meter.

When taking measurements with the luminance meter, observe
the distance recommended by the manufacturer (40 - 60 cm).

F.6

✧

Switch on the monitor.

✧

Select test image 1 to measure the minimum and maxi-
mum luminance.

In test image 1, the squares for the maximum grayscale value
(L

max.

, bright field) and the minimum grayscale value (L

min.

black field) are used.

F.6

Содержание SOMATOM Spirit





































































































































































































































































































































































































































































































Результаты поиска

Содержание SOMATOM Spirit

Отзывы:

Siemens SOMATOM Spirit, Руководство оператора, Страница: 446 / 484

Результаты поиска

Содержание SOMATOM Spirit

Отзывы: