Siemens SOMATOM Spirit Скачать руководство пользователя страница 29

Страница: 29 / 484

Safety

General Safety Information

0.0

04/2012

0.0

A.1-7

0.0

Patients with implants

A.1

Possible interference from the CT with implants must be clari-
fied prior to examination.

A.1

Uncontrolled movements of
the patient

A.1

Motion artifacts and/or injuries of the patient may occur if he/
she moves uncontrollably during acquisition.

A.1

✧

Immobilize the patient, if necessary.

Restraint straps

A.1

The restraint straps are not permanently attached to the table.
Thus, they cannot prevent the patient from falling off the table.

A.1

✧

Make sure that the patient, especially a restless patient,
does not fall off the table.

A.1

CAUTION

A.1

Scanning patients with implanted devices such as pacemakers
or neuro stimulators!

A.1

Interferences may cause malfunctions of the implanted
device.

A.1

✧

Observe the patient closely during examination.

Содержание SOMATOM Spirit





































































































































































































































































































































































































































































































Результаты поиска

Содержание SOMATOM Spirit

Отзывы:

Siemens SOMATOM Spirit, Руководство оператора, Страница: 29 / 484

Результаты поиска

Содержание SOMATOM Spirit

Отзывы: