Siemens SOMATOM Spirit Скачать руководство пользователя страница 249

Страница: 249 / 484

Operation

Switching the System On and Off

0.0

04/2012

0.0

D.1-15

0.0

D.1

✧

Click on

Yes

All applications will be closed. The system will continue to shut
down.

D.1

✧

Click on

You return to the user interface.

D.1

✧

Exit all applications on the user interface.

Switching off the system

D.1

✓

If no errors occur during shutdown, the computer will be
switched off.

D.1

✧

Press the

pushbutton at the UPS at least 3 seconds.

The console will be switched off.

D.1

Unless absolutely necessary, do not switch off the system at the
main switch provided by the customer or the

EMERGENCY OFF

switch. Otherwise you will have to calibrate the system several
times when you restart it.

(→

D.1

Содержание SOMATOM Spirit





































































































































































































































































































































































































































































































Результаты поиска

Содержание SOMATOM Spirit

Отзывы:

Siemens SOMATOM Spirit, Руководство оператора, Страница: 249 / 484

Результаты поиска

Содержание SOMATOM Spirit

Отзывы: