Siemens SOMATOM Spirit Скачать руководство пользователя страница 332

Страница: 332 / 484

0.0

Positioning the Patient

Operation

D.4-26

SOMATOM Spirit

0.0

✧

Position the head of the patient in the head holder.

✧

Place the knee support under both legs of the patient.

✧

Make sure that the patient pulls his or her shoulders down
and is relaxed.

✧

Immobilize the head and, if necessary, use the pads and the
Velcro straps.

✧

Place the arms of the patient next to the body.

✧

Make sure that there is no metal in the scanning area.

Positioning

D.4

The yellow segment in the schematic representation indicates
starting position and radiation direction for topogram.

D.4

Содержание SOMATOM Spirit





































































































































































































































































































































































































































































































Результаты поиска

Содержание SOMATOM Spirit

Отзывы:

Siemens SOMATOM Spirit, Руководство оператора, Страница: 332 / 484

Результаты поиска

Содержание SOMATOM Spirit

Отзывы: