Siemens SOMATOM Spirit Скачать руководство пользователя страница 11

Страница: 11 / 484

Introduction

0.0

04/2012

0.0

Validity of the operator man-
ual

0.0

This operator manual is only valid for the stated software ver-
sion and in conjunction with the latest release note.

0.0

The release note can extend the validity of the operator manual
for the following versions.

0.0

This manual applies to the following devices:

0.0

❏

SOMATOM Spirit

Information on the configuration of your system can be
obtained via

Options > SOMATOM LifeNet > System Informa-

tion

0.0

Information via internet

0.0

More detailed information on accessories can be obtained via
Internet.

(→

www.medical.siemens.com). Select your country

on the Siemens Healthcare home page and then navigate to the
products information.

0.0

Содержание SOMATOM Spirit





































































































































































































































































































































































































































































































Результаты поиска

Содержание SOMATOM Spirit

Отзывы:

Siemens SOMATOM Spirit, Руководство оператора, Страница: 11 / 484

Результаты поиска

Содержание SOMATOM Spirit

Отзывы: