Siemens SOMATOM Spirit Скачать руководство пользователя страница 326

Страница: 326 / 484

0.0

Positioning the Patient

Operation

D.4-20

SOMATOM Spirit

0.0

✧

Lay the coronal supine head holder onto the positioning
mat at the head end of the patient table.

✧

Position the patient supine.

✧

Ask the patient to slide far enough beyond the edge of the
table at the head end that his or her head is tilted backward
as far as possible.

✧

Immobilize the head with the straps, if necessary.

Positioning

D.4

The yellow segment in the schematic representation indicates
starting position and radiation direction for topogram.

D.4

Содержание SOMATOM Spirit





































































































































































































































































































































































































































































































Результаты поиска

Содержание SOMATOM Spirit

Отзывы:

Siemens SOMATOM Spirit, Руководство оператора, Страница: 326 / 484

Результаты поиска

Содержание SOMATOM Spirit

Отзывы: