Siemens SOMATOM Spirit Скачать руководство пользователя страница 268

Страница: 268 / 484

0.0

Accessories for Patient Positioning

Operation

D.3-2

SOMATOM Spirit

0.0

Important safety information

D.3

D.3

Positioning aids are subject to wear and tear. They must be
replaced with original parts if they become dirty or damaged.

D.3

CAUTION

D.3

Use of non-original positioning aids!

D.3

Danger for the patient through collisions with the gantry.
Image quality may also decrease.

D.3

✧

Do not use any positioning aids not mentioned in this sec-
tion.

Содержание SOMATOM Spirit





































































































































































































































































































































































































































































































Результаты поиска

Содержание SOMATOM Spirit

Отзывы:

Siemens SOMATOM Spirit, Руководство оператора, Страница: 268 / 484

Результаты поиска

Содержание SOMATOM Spirit

Отзывы: