Siemens SOMATOM Spirit Скачать руководство пользователя страница 287

Страница: 287 / 484

Operation

Accessories for Patient Positioning

0.0

04/2012

0.0

D.3-21

0.0

Safety instructions

D.3

Warning label: Insert pads

D.3

D.3

Use of insert pads!

D.3

Increased risk of the head of the patient hitting the gantry.

D.3

✧

Always watch the patient while the table is moving - espe-
cially if the gantry is tilted.

D.3

Do not use surgical spirit for cleaning. It could cause the surface
material to become wrinkled.

D.3

Please note that the shape and dimensions of the head support
may result in restrictions in operation.

D.3

Using the cushion set

D.3

✧

Attach the head holder to the head end of the table for
positioning the head.

✧

Place the flat cushion or one of the head cushions in the
head holder.

✧

Position the patient’s head in the desired position and
immobilize the head with the pads on both sides.

✧

Run the restraint strap over the forehead of the patient and
fasten it at the head support with the Velcro straps.

Содержание SOMATOM Spirit





































































































































































































































































































































































































































































































Результаты поиска

Содержание SOMATOM Spirit

Отзывы:

Siemens SOMATOM Spirit, Руководство оператора, Страница: 287 / 484

Результаты поиска

Содержание SOMATOM Spirit

Отзывы: