Siemens SOMATOM Spirit Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 484

Siemens SOMATOM Spirit Скачать руководство пользователя страница 17

Introduction

0.0

04/2012

0.0

xv

0.0

Medical practice

0.0

The information presented in this documentation is for illustra-
tion only and is not intended to be relied upon by the reader for
instruction as to the practice of medicine.

0.0

Any health care practitioner reading this information is reminded
that they must use their own learning, training, and expertise in
dealing with their individual patients. This material does not sub-
stitute for that duty and is not intended by Siemens, to be used
for any purpose in that regard.

0.0

The drugs and doses mentioned are consistent with the
approval labeling for uses and/or indications of the drug. The
treating physician bears the sole responsibility for the diagnosis
and treatment of patients, including drugs and doses prescribed
in connection with such use.

0.0

«
...
15
16
17
18
19
...
»

Содержание SOMATOM Spirit





































































































































































































































































































































































































































































































Отзывы:

Нет отзывов