Siemens SOMATOM Spirit Скачать руководство пользователя страница 313

Страница: 313 / 484

Operation

Positioning the Patient

0.0

04/2012

0.0

D.4-7

0.0

D.4

The positioning mat has to be fastened onto the table top so
that its position marker is aligned with the corresponding
marker of the table top.

D.4

The positioning mat must be correctly secured.

D.4

We recommend covering the mat with paper, for example, with
HOSTESS paper cloths No 75312. Length 50 m, width 60 cm,
perforation every 28 cm.

D.4

✧

Use any positioning accessories which might be necessary.

(→

Page D.4-16

Using standard accessories

)

(→

Page D.4-34

Using optional accessories

)

Preparing the patient

D.4

✧

Jewelry, glasses, prostheses, and so on, must be removed
from the body region to be examined.

✧

Now position the patient on the table using the necessary
accessories.

Содержание SOMATOM Spirit





































































































































































































































































































































































































































































































Результаты поиска

Содержание SOMATOM Spirit

Отзывы:

Siemens SOMATOM Spirit, Руководство оператора, Страница: 313 / 484

Результаты поиска

Содержание SOMATOM Spirit

Отзывы: