Siemens SOMATOM Spirit Скачать руководство пользователя страница 48

Страница: 48 / 484

0.0

Information about Personal Safety

Safety

A.2-6

SOMATOM Spirit

0.0

Special instructions on RTP Laser Adjustment

A.2

✧

Ensure that the most recent version of service documenta-
tion is available.

✧

Do not operate laser products without the appropriate
housing.

All legal and product-specific regulations must be followed
when working with lasers.

A.2

Non-compliance with these regulations can lead to injury due to
the hazardous effects of laser beam.

A.2

CAUTION

A.2

Laser radiation!

A.2

Possible loss of eyesight due to laser radiation.

A.2

✧

Do not look directly into the laser beam or at its reflection
on smooth, mirror-like surfaces during adjustment.

Содержание SOMATOM Spirit





































































































































































































































































































































































































































































































Результаты поиска

Содержание SOMATOM Spirit

Отзывы:

Siemens SOMATOM Spirit, Руководство оператора, Страница: 48 / 484

Результаты поиска

Содержание SOMATOM Spirit

Отзывы: