Siemens SOMATOM Spirit Скачать руководство пользователя страница 220

Страница: 220 / 484

0.0

Use of Storage Media

System Handling

C.3-4

SOMATOM Spirit

0.0

DVD recorder

C.3

As soon as you have switched on the system or computer, the
DVD recorder is also ready for operation.

C.3

Inserting a disc

C.3

✓

The DVD recorder is switched on and the status LED lights
up green.

✧

Press the insert/eject key briefly.

The drawer moves out.

C.3

✧

Insert the disc into the drawer with the label side up.

✧

Press the insert/eject key again briefly.

The drawer is retracted.

C.3

As soon as the disc has been inserted and the drive is ready for
reading and writing, the status LED lights up green.

C.3

If the status LED does not light up green after you have inserted
the disc, the disc is damaged or dirty.

C.3

Take the disc out of the drive.

C.3

Содержание SOMATOM Spirit





































































































































































































































































































































































































































































































Результаты поиска

Содержание SOMATOM Spirit

Отзывы:

Siemens SOMATOM Spirit, Руководство оператора, Страница: 220 / 484

Результаты поиска

Содержание SOMATOM Spirit

Отзывы: