Siemens SOMATOM Spirit Скачать руководство пользователя страница 222

Страница: 222 / 484

0.0

Use of Storage Media

System Handling

C.3-6

SOMATOM Spirit

0.0

Ejecting the disc

C.3

✓

Reading and writing has been completed and the drive is
not being accessed

✓

The read/write status LED has gone out.

C.3

✧

Call up

Transfer > Eject from CD

in the main menu.

✧

Select

DVD-Combo

and click the

Eject

key.

The drawer moves out.

C.3

✧

Take the CD or DVD out of the drawer when the mechanism
stops and put it back in its cover.

✧

Press the insert/eject key again.

The drawer is retracted again.

C.3

If the status LED flashes red, a drive fault has occurred. Contact
Siemens Service.

C.3

CAUTION

C.3

Taking out the CD or DVD too early!

C.3

Loss of data and destruction of the CD-R possible.

C.3

✧

Do not remove the CD-R from the CD recorder until the
recording process has been completed and the status LED
has gone out.

✧

Use the

Transfer

menu to eject media.

Содержание SOMATOM Spirit





































































































































































































































































































































































































































































































Результаты поиска

Содержание SOMATOM Spirit

Отзывы:

Siemens SOMATOM Spirit, Руководство оператора, Страница: 222 / 484

Результаты поиска

Содержание SOMATOM Spirit

Отзывы: