Siemens SOMATOM Spirit Скачать руководство пользователя страница 361 | Manualshive

Страница: 361 / 484

Siemens SOMATOM Spirit Скачать руководство пользователя страница 361

Maintenance

Cleaning Agents and Disinfectants

0.0

04/2012

0.0

E.2-5

0.0

Veterinary use

E.2

Veterinary use of the SOMATOM CT system requires that you
sufficiently clean the table and positioning aids. In case of
mixed operation for both animal and human patients, the clean-
ing media used should also be approved for humans. The clean-
ing agents and disinfectants are described in:

(→

Operator Man-

ual).

E.2

E.2

E.2

E.2

CAUTION

E.2

Insufficient cleaning!

E.2

Risk of infection (biohazard).

E.2

✧

Make sure that the table and the positioning aids are clean
and covered with paper, if possible.

E.2

CAUTION

E.2

Using of cleaning media not approved for humans!

E.2

Allergic reaction or allergic shock.

E.2

✧

Always use cleaning media also approved for humans.

«
...
359
360
361
362
363
...
»

Содержание SOMATOM Spirit





































































































































































































































































































































































































































































































Отзывы:

Нет отзывов