Siemens SOMATOM Spirit Скачать руководство пользователя страница 162

Страница: 162 / 484

0.0

Console Related Safety Advice

System Description

B.4-6

SOMATOM Spirit

0.0

You can clean the screen even if the monitor is switched on.

B.4

Using an anti-static cleaner will give you the best results when
cleaning the screen surface.

B.4

✧

Always clean the housing with a damp but not wet cloth.

✧

Use a soft cloth to clean the screen. If necessary, dampen it
with a domestic glass cleaner.

✧

Remove water drops immediately; extended contact with
water discolors the surface.

✧

In order to avoiding damage to the surface coating, never
use corrosive agents to clean the screen surface.

Transportation

B.4

The monitor has to be packed properly when transported.

B.4

CAUTION

B.4

Dropping of the CRT monitor!

B.4

Injury of user, patient and other persons (implosion of the
monitor).

B.4

✧

Never drop the monitor.

✧

For transport of the monitor call Siemens Service.

Содержание SOMATOM Spirit





































































































































































































































































































































































































































































































Результаты поиска

Содержание SOMATOM Spirit

Отзывы:

Siemens SOMATOM Spirit, Руководство оператора, Страница: 162 / 484

Результаты поиска

Содержание SOMATOM Spirit

Отзывы: