Siemens SIPART DR21 Скачать руководство пользователя страница 24

Страница: 24 / 242

2 Technical Description

2.4 Design

Manual

SIPART DR21

C73000-B7476-C143-08

2.4

Design

Standard controller

The process controller has a modular structure and is therefore maintenance friendly and

easy to convert- and retrofit.

The standard controller consists of

the front module with the control- and display elements

the backplane module with the power supply unit

the plastic housing with four slots for optional modules

Front module

The front module accommodates the control- and display elements, the CPU (Central Pro-

cessing Unit) and the connectors for the backplane- and options modules.

It is operated by a membrane keyboard with IP64 degree of protection. The front design is

based directly on the SIPART DR 20/22/24-controller-family with color coded assignment of

the display- and control elements.

For better monitoring of the process, SIPART DR21 has user-friendly analog displays for the

setpoint- and actual value display, a four-digit digital display which can be set for setpoint,

actual value and alarms (depending on the controller setting), a two-digit digital display for

the manipulated variable y, numerous control keys and indicator diodes for various status

signals.

The tag plate and the scales for the analog displays are replaceable.

Backplane module with power supply unit

The following signal connections are accessible through the backplane.

- 2 analog inputs AI1, AI2, potential-bound to GND, 0/4 to 20 mA

- 1 analog output AO, potential-bound to GND, 0/4 to 20 mA

- 2 digital o

y,-

y, potential-free via relay contacts

- 2 digital inputs DI1, DI2, for 24V-logic, function can be set

- 2 digital outputs DO1, DO2, for 24V- logic, function and direction can be set

- 1 Voltage output L+ to the transmitter supply

The power supply is located in a die-cast housing on the backplane module. The heat loss is

transferred to the back of the controller by cooling fins.

A DIN rail can be mounted for connecting a powerful coupling relay module.

The power supply unit is high powered and offers a total 200 mA current for:

- supplying the analog output (0/4 to 20 mA)

- Active digital outputs (up to 6 digital outputs)

- L+-output for supplying two-wire-transmitters

- supplying the interface module

Содержание SIPART DR21



















































































































































































































































Результаты поиска

Содержание SIPART DR21

Отзывы:

Похожие инструкции для SIPART DR21

Бренды по названию

Популярные бренды

Siemens SIPART DR21, Руководство пользователя

Результаты поиска

Содержание SIPART DR21

Отзывы:

Похожие инструкции для SIPART DR21

Бренды по названию

Популярные бренды