Siemens SINUMERIK 840D Скачать руководство пользователя страница 176

Страница: 176 / 610

Simulating machining

5.1 Overview

Milling

176

Operating Manual, 03/2010, 6FC5398-7CP20-1BA0

General conditions
●

All of the existing data records (Toolcarrier / TRAORI, TRACYL) are evaluated and must

be correctly commissioned for correct simulation.

●

Transformations with swiveled linear axis (TRAORI 64 - 69) as well as OEM

transformations (TRAORI 4096 - 4098) are not supported.

●

Changes to the toolcarrier or transformation data only become effective after Power On.

●

Transformation change and swivel data record change are supported. However, a real

kinematic change is not supported, where a swivel head is physically changed out.

●

The simulation of mold building programs with extremely short block change times can

take longer than machining, as the computation time distribution for this application is

dimensioned in favor of the machining and to the detriment of simulation.

Examples
Several examples for machine types that are supported:

Swivel head 90°/90°

Содержание SINUMERIK 840D



































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SINUMERIK 840D

Отзывы:

Siemens SINUMERIK 840D, Руководство по эксплуатации, Страница: 176 / 610

Результаты поиска

Содержание SINUMERIK 840D

Отзывы: