Siemens SINUMERIK 840D, Руководство по эксплуатации, Страница: 21 / 610

Introduction
1.2 Operator panel fronts
Milling
Operating Manual, 03/2010, 6FC5398-7CP20-1BA0
21
Key Function
<PAGE DOWN>
Scrolls downwards by one page in a window.
+ <PAGE DOWN> + <SHIFT>
In the program manager and in the program editor, from the
cursor position, selects directories or program blocks up to the
end of the window.
+ <PAGE DOWN> + <CTRL>
Positions the cursor to the lowest line of a window.
<Cursor right>

Editing box
Opens a directory or program (e.g. cycle) in the editor.
 Navigation
Moves the cursor further to the right by one character.
+ <Cursor right> + <CTRL>

Editing box
Moves the cursor further to the right by one word.

Navigation
Moves the cursor in a table to the next cell to the right.
<Cursor left>
 Editing box
Closes a directory or program (e.g. cycle) in the program
editor. If you have made changed, then these are
accepted.

Navigation
Moves the cursor further to the left by one character.
+ <Cursor left> + <CTRL>

Editing box
Moves the cursor further to the left by one word.
 Navigation
Moves the cursor in a table to the next cell to the left.