Backing up data and series commissioning
8.2 Backing up and transferring settings using STARTER
Converter with control units CU250D-2
Operating Instructions, 04/2015, FW V4.7.3, A5E34261542B AB
281
8.2
Backing up and transferring settings using STARTER
With the supply voltage switched on,
you can transfer the converter settings
from the converter to a PG/PC, or the
data from a PG/PC to the converter.
The precondition is that you have a
commissioning tool on your PG/PC.
You will find more information on PC tools in section: Commissioning tools (Page 25).
Inverter
→
PC/PG
Procedure with STARTER
To back up the settings with STARTER, proceed as follows:
1.
Go online:
.
2.
Click the "Download project to PG" button: .
3.
Save the project: .
4.
Wait until STARTER reports that data backup has been completed.
5.
Go offline: .
You have backed up the settings with STARTER.
Procedure with Startdrive
To back up the settings with Startdrive, proceed as follows:
1.
Go online.
2.
Select "Online" > "Upload device to PG/PC."
3.
Back up the project with "Project" > "Save."
4.
Wait until Startdrive reports that data backup has been completed.
5.
Go offline.
You have backed up the settings with Startdrive.
