Siemens SIMOTION SCOUT Скачать руководство пользователя страница 211

Страница: 211 / 244

Product combinations

13.1

Compatibility

13.1.1

General compatibility

Different hardware and software combinations as well as different Kernel and SIMOTION

SCOUT version combinations are possible when using SIMOTION.
These possible combinations can be found in the compatibility list on the SIMOTION SCOUT

add-on CD (at 1_Important) as well as on the Internet at:
Internet

13.1.2

Software compatibility

Technology packages with Kernel

The SIMOTION Kernel and the technology packages must always have the same version.
The current compatibility list is available online (

http://support.automation.siemens.com/WW/

view/en/18857317

Project on memory card with SIMOTION Kernel

A project contains SIMOTION devices with a particular configured version. This exact

SIMOTION Kernel version must be available on the relevant SIMOTION device.

SIMOTION SCOUT with project version

A project with a version earlier than the installed version of SIMOTION SCOUT will be

converted to the current version when it is opened. Only the data content of the

SIMOTION project will be converted to the current version, but not the SIMOTION device

version.

Содержание SIMOTION SCOUT





















































































































































































































































Результаты поиска

Содержание SIMOTION SCOUT

Отзывы:

Похожие инструкции для SIMOTION SCOUT

Бренды по названию

Популярные бренды

Siemens SIMOTION SCOUT, Руководство по настройке

Результаты поиска

Содержание SIMOTION SCOUT

Отзывы:

Похожие инструкции для SIMOTION SCOUT

Бренды по названию

Популярные бренды