manualshive.com logo in svg

Siemens SIMOTION SCOUT, Руководство по настройке


Поделиться
Скачать
background image

13.8

CamTool

Graphic creation of cams   

Simple text-based editors are already integrated in the basic SIMOTION SCOUT package for 

the creation of cams. The CamTool option package extends SIMOTION SCOUT with a 

powerful tool for the full graphical creation and optimization of cams. CamTool fully integrates 

into the SIMOTION SCOUT user interface. In SIMOTION CamTool, you can create, edit and 

optimize cams with the aid of a graphical user interface.

Additional references

Please refer to the following document on this subject
● Configuration Manual: SIMOTION CamTool

13.9

DCC programming system

Drive Control Chart

DCC enables SIMOTION and SINAMICS users to also implement and graphically configure 

drive-related tasks employing continuous closed-loop and open-loop control.    
A set of Drive Control Blocks (DCB) is available in a library for this purpose. These function 

blocks can be graphically interconnected and configured in what are known as "charts" via a 

configuration tool (DCC editor).
A large number of Drive Control Blocks (DCB) are available for both DCC-SIMOTION and 

DCC-SINAMICS with identical functionality.
● Module library with administration, calculation, control, logic and complex modules.
● Graphical switching editor with various editing, macro, help, search, comparison and print 

functions.

● Sequence environment for SIMOTION with selectable, mixable scanning times and 

consistent data transfer between scanning periods.

● Sequence environment for SINAMICS with embedding of technology option in SINAMICS 

using the BICO technique, with the applications set using configured parameters

● Diagnostics environment with signal display, diagnostics and trace functions.
● Scalability with different performance features and project data volumes for DCC-

SIMOTION and DCC-SINAMICS.

Note
Editing and deleting DCC charts
To edit DCC charts, a CFC editor must be installed and you require a valid license for DCC 

SINAMICS or DCC SIMOTION.

Product combinations
13.9 DCC programming system

SIMOTION SCOUT

222

Configuration Manual, 11/2016

Содержание SIMOTION SCOUT





















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SIMOTION SCOUT

S&C 6800 Series Instruction Sheet preview
6800 Series
Бренд: S&C Страницы: 40
KELCO F60 Installation Instructions Manual preview
F60
Бренд: KELCO Страницы: 36
Fairchild 63 Installation, Operation And Maintenance Instructions preview
63
Бренд: Fairchild Страницы: 2
Fagor 101 Operating Manual preview
101
Бренд: Fagor Страницы: 103
Dahua NKB User Manual preview
NKB
Бренд: Dahua Страницы: 58
Garmin G1000 NXi Cockpit Reference Manual preview
G1000 NXi
Бренд: Garmin Страницы: 220
Gardena 1251 Operator'S Manual preview
1251
Бренд: Gardena Страницы: 16
Samson 3354 Mounting And Operating Instructions preview
3354
Бренд: Samson Страницы: 40
T&S B-0107 Installation And Maintenance Instructions preview
B-0107
Бренд: T&S Страницы: 5
ValvTechnologies V1 Series Installation And Operations Maintenance Manual preview
V1 Series
Бренд: ValvTechnologies Страницы: 20
Velleman VM130V2SET Quick Start Manual preview
VM130V2SET
Бренд: Velleman Страницы: 26
Velleman VM151 Manual preview
VM151
Бренд: Velleman Страницы: 32
Velocity MMP Operation And Maintenance Manual preview
MMP
Бренд: Velocity Страницы: 84
Zamel P-258/2 Instructions Manual preview
P-258/2
Бренд: Zamel Страницы: 23
Zamel P-256/8 Manual Instruction preview
P-256/8
Бренд: Zamel Страницы: 2
Zamel supla SRW-01 Quick Start Manual preview
supla SRW-01
Бренд: Zamel Страницы: 2
Zander Aachen SCB Series Operating Instructions Manual preview
SCB Series
Бренд: Zander Aachen Страницы: 44
Zamel Extra Free ROB-01/12-24V Manual Instruction preview
Extra Free ROB-01/12-24V
Бренд: Zamel Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды