9 Operation at Use of a PC
9.3 Configuration of the Device
225
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
1)
Use the template value shown as default in the
Topic name
for the connection with MindSphere. The parts
in curly brackets are filled internally at startup.
2)
Refer to the manual
OPC UA PubSub (MQTT) Data Points
to identify the individual data points.
✧
Enter the desired values into the fields and select the corresponding parameters in the list boxes as
described in Table 9-25.
In the
Data transmission
section, you can select whether the data groups are transmitted via the OPC
UA PubSub (MQTT) or not. The following data are always transmitted:
Indications
operational measured values
flicker, security counters
the asset information files
✧
After the parameterization click
Send
.
The parameters are transmitted to the device but not enabled yet (passive set of parameters).
✧
If you do not want to make any additional settings, continue with the
Activation
of the device configuration
according to section
Activating the Set of Parameters
. If you want to change other settings, enter the
changes and then enable the device configuration as described in section
Upload Certificates
You can click
Upload certificates
to upload the keys and certificates which are needed to establish a secure
Harmonics power
2)
yes
yes
no
Energy counters
2)
yes
yes
no
Energy counters transmit cycle
1 min
1 min to 1440 min
Parameter
Default Setting
Setting Range
MAN_SICAM_Q100_US.book Page 225 Wednesday, June 5, 2019 9:31 AM