manualshive.com logo in svg

Siemens SICAM Q100 7KG95 Series, Руководство пользователя, Страница: 112 / 448

Поделиться
Скачать
Siemens SICAM Q100 7KG95 Series Скачать руководство пользователя страница 112

7 Getting Started

7.1 Unpacking, Inspecting the Delivery, Installing, and Changing the Battery

112

SICAM Q100, 7KG95xx, Device Manual

E50417-H1040-C522-A6, Edition 06.2019

7.1

Unpacking, Inspecting the Delivery, Installing, and Changing the 
Battery

Unpacking

The SICAM Q100 has been safely packed for transport in the factory. Unpack the device with care and do not 
use force. Use an appropriate tool if necessary. After unpacking, inspect the device visually for any mechanical 
defects.

Observe any additional notes enclosed with the packaging.

Keep the transport packaging for future transport.

Inspecting the Delivery

After unpacking, first compare the packing list against your original purchase order to check that the delivered 
device has the desired rated data and functions and that all necessary and ordered accessories are enclosed.

Installing the Battery

If you want to operate the device immediately after the delivery, first insert the battery before beginning the in-
stallation. Upon delivery the battery is insulated in the battery compartment of the device.

If you want to operate the device later, insert the battery only just before you intend to use the device. 

To insert the battery, observe the notes in the supplied Product Information and proceed as follows:

✧

Lever the cover of the battery compartment out of the socket with a suitable tool (for example precision 
engineer screwdriver 2.0 mm).

Figure 7-1

Top side of the SICAM Q100

NOTE

If the device has been damaged during transport, do not connect and operate it.

NOTE

The battery powers the battery-buffered memory (SRAM) and the real-time clock (RTC). But the device can 
still be operated when no battery is inserted or when the battery is discharged. If, however, the supply voltage 
is lost, all metered energy values and error reports are deleted and the real-time clock is reset 
(2000-01-01 00:00).

Customer-specific parameters are permanently stored in the Flash-EPROM even without a battery.

Cover of battery

Polarity of

the battery

compartment

MAN_SICAM_Q100_US.book  Page 112  Wednesday, June 5, 2019  9:31 AM

Содержание SICAM Q100 7KG95 Series

































































































































































































































































































































































































































































Отзывы:

Нет отзывов