Siemens scalance WLC711, Справочное руководство

Страница: 372 / 417

strict-subnet
Use the
strict-subnet
command to enable or disable strict subnet adherence on a b@ac topology.
The
strict-subnet
command is available from the topology:<named-topology> context of the CLI
for b@ac topologies.
strict-subnet enable | disable
Parameters
enable
Enables strict subnet adherence.
disable
Disables strict subnet adherence.
Example
The following example enables strict subnet adherence on a b@ac topology:
WLC.siemens.com
:topology:bridged_ac1# strict-subnet enable
sync
Use the
sync
command to enable or disable automatic synchronization of this topology across paired
controllers. The
sync
command is available from the topology:<named-topology> context of the CLI
for b@ac, b@ap, and routed topologies.
sync enable | disable
Parameters
enable
Enables synchronization.
disable
Disables synchronization.
Example
The following example enables synchronization:
WLC.siemens.com
:topology:r1# sync enable
topology-group
Executing the
topology-group
command moves you into the topology:topology-group context, in
which you can create or delete topology groups. The
topology-group
command is entered in the
topology context.
A Topology Group is a list of topologies associated with a unique name and a VLAN ID. All the
topologies in a defined topology group have the same type: either B@AC or routed. Any time the
controller MU Session Manager assigns a role, any topology group in the role will be replaced by a
member topology contained in the group. If a topology group is referenced multiple times, only 1
topology from the group is selected. A different user could be assigned a different member topology
topology Commands
strict-subnet
SCALANCE WLC711 CLI Reference Guide 372