Siemens scalance WLC711, Справочное руководство

Страница: 229 / 417

Example
The following example specifies the exception traffic to be captured on esa0:
WLC.siemens.com
:traffic_capture# interface esa0
delete
Use the
delete
command to delete the TCPDump file. The
delete
command is accessible from the
traffic_capture context of the CLI.
To display the “TCPDump file capture” list, run the
list
command from the traffic_capture context of
the CLI. For more information, see list on page 229.
delete # from the capture file list
Parameters
# from the capture file
list
The sequence in which the files are listed in the capture file list
Example
The following example specifies the file # 1 in the “TCPDump file capture” list to be deleted:
WLC.siemens.com
:traffic_capture# delete 1
list
Use the
list
command to display the “TCPDump file capture” list. The
list
command is accessible
from the traffic_capture context of the CLI.
The files that are stored on the CF card have flash suffixed to their file names. For example,
mgmt_traffic_dump.cap (flash). The files that are stored on the local drive of the controller do not have
anything suffixed to them.
You can save only one TCPDump file on the local drive.
list
Parameters
None
Example
The following example displays the list of TCPDump file capture:
WLC.siemens.com :traffic_capture# list
Traffic Capture Files:
traffic_capture Commands
delete
SCALANCE WLC711 CLI Reference Guide 229