vlanid
Use the
vlanid
command to configure the VLAN ID of a physical topology or change the VLAN ID of
b@ac or b@ap topologies. The
vlanid
command is available from the topology:<named-topology>:l2
context of the CLI for b@ac, b@ap, and physical topologies.
vlanid 1-4094
Parameters
1-4094
The VLAN ID that you want to assign to the topology.
Example
This following example sets the VLAN ID of the topology named test to 2:
WLC.siemens.com
:topology:test:l2# vlanid 2
l3
Use the
l3
command to enter the topology:<named-topology>:l3 context of the CLI for Admin, b@ac,
b@ap, physical, and routed topologies. The l3 context allows you to configure the Layer 3 functions of
the topology. The l3 context is now available in b@ac mode when l3presence is set to disable. For more
information, see
on page 370.
The following commands are available in the topology:<named-topology>:l3 context.
•
on page 350
•
on page 350
•
•
on page 352 for commands in the topology:<named-topology>:l3:
dhcp context.
•
on page 360 for commands in the topology:<named-
topology>:l3:exceptions context.
•
•
on page 364
•
on page 364
•
•
on page 366
•
•
•
•
on page 367 for named toplogies with disabled l3presence. See
•
on page 368
•
•
on page 369
•
on page 369
topology Commands
vlanid
SCALANCE WLC711 CLI Reference Guide
349
Содержание scalance WLC711
Страница 1: ...SCALANCE WLC711 CLI Reference Guide Release V9 21 14 C79000 G8976 C261 07 Published July 2015 ...
Страница 21: ...dns 2 192 1 2 3 dns 3 192 1 3 3 Common Commands show SCALANCE WLC711 CLI Reference Guide 21 ...
Страница 376: ...Example topology Commands vlanid SCALANCE WLC711 CLI Reference Guide 376 ...
