Siemens scalance WLC711, Справочное руководство

Страница: 191 / 417

The following example adds channels 1, 3, and 9 to the scan profile:
WLC.siemens.com
:mitigator:scprof:scp_name# channels 1,3,9
WLC.siemens.com
:mitigator:scprof:scp_name# apply
classification
Use the
classification
command to enable or disable interference classification on this profile. The
classification
command is accessible from the mitigator:scprof:<named scan profile> context and
the mitigator:gsprof:<named guardian scan profile> context of the CLI.
After you run the
classification
command, run the
apply
command to implement the change.
classification (enable | disable)
Parameters
enable
Enables interference classification on this profile
disable
Disables interference classification on this profile
Example
The following example enables classification:
WLC.siemens.com
:mitigator:scprof:scp_name# classification enable
WLC.siemens.com
:mitigator:scprof:scp_name# apply
concurrent-number
Use the
concurrent-number
command to configure the maximum number of channels on which a
Guardian AP can concurrently launch countermeasures. The
concurrent-number
command is
accessible from the mitigator:gsprof:<named guardian scan profile> context of the CLI.
After you run the
concurrent-number
command, run the
apply
command to implement the change.
concurrent-number 1-4
Parameters
1-4
The maximum number of channels on which countermeasures can be concurrently
launched. Valid values are not less than one, or greater than 4.
Usage
This command can be applied only to AP3715s. An AP3715 can concurrently launch countermeasures
on all channels it is scanning. As more countermeasures are applied and the number of channels to
which they are applied increases, the frequency of countermeasures being applied will decrease.
Radar Commands
classification
SCALANCE WLC711 CLI Reference Guide 191