Siemens scalance WLC711, Справочное руководство

Страница: 143 / 417

Available radio channels:
36: 5180 MHz
40: 5200 MHz
44: 5220 MHz
48: 5240 MHz
52: 5260 MHz
56: 5280 MHz
60: 5300 MHz
64: 5320 MHz
100: 5500 MHz
104: 5520 MHz
108: 5540 MHz
112: 5560 MHz
116: 5580 MHz
120: 5600 MHz
124: 5620 MHz
128: 5640 MHz
132: 5660 MHz
136: 5680 MHz
140: 5700 MHz
149: 5745 MHz
153: 5765 MHz
157: 5785 MHz
161: 5805 MHz
165: 5825 MHz
update_period
Use the
update_period
command to set the DCS update period, during which the Wireless AP
averages the DCS noise threshold and DCS channel occupancy threshold measurements. If either one
of these thresholds is exceeded, the Wireless AP triggers ACS. The
update_period
command is
accessible from 11n, ap37xx, ap38xx, ap3801, dualband, std, and <serial> dcs contexts of the CLI.
update_period period
Parameters
period
Specifies the time period, measured in minutes, during which the Wireless AP averages
the DCS noise threshold and DCS channel occupancy threshold measurements. If either
one of these thresholds is exceeded, then the Wireless AP triggers ACS.
Range is 1 to 15 minutes, or 0 to disable.
Example
The following example sets the DCS update period to 12 minutes:
WLC.siemens.com :ap:defaults:ap37xx:radio1:dcs# update_period 12
The following example disables the DCS update period:
WLC.siemens.com
:ap:defaults:ap37xx:radio1:dcs# update_period 0
ap Commands
update_period
SCALANCE WLC711 CLI Reference Guide 143