Siemens MOBIC T8 for Windows CE 3.0, Руководство пользователя

Страница: 139 / 153

Frequently Asked Questions (FAQs)
13-5
MOBIC T8 for Windows CE 3.0
C79000-G8976-C190-02
Using a modem
Before you use a modem, disable all the network adapters.
The installed network adapters are listed in Start - > Settings - > Control Panel
- > Network. Using Network Configuration and the Properties button, you can
enter the IP configuration in the IP Address properties page (specify an IP address
button) or you can activate or deactivate the network adapter (Disable network
driver button).
Important:
S
Disable all network adapters if you want to use a modem.
S
Following this, the device must be reset (network configuration, reset device
button).
What is the “Network Resources” program used for?
Your MOBIC has a program with the name “Network Resources”. Using this
program, you can establish a connection between the MOBIC and a network
computer or network folder.
To start the program:
Tap on Start - >Programs - >Tools - >Network Resources.
You establish a connection between the MOBIC and a network computer or
network folder as follows:
1. Open the “Network Resources” program.
2. Tap on “New Connection”
3. In “Remote Path”, specify the server and the share name of the resource as
follows: \\Servername\Sharename.
4. In “Local Name”, enter a name to be assigned to this shared resource.
5. Confirm with “OK” and close “Network Resources” with the “Close” button.
6. This newly created connection is stored in the “NETWORK” folder (My
Computer - > NETWORK) in the name specified in “Local Name”.
7. By double - clicking the connection stored in the “NETWORK” folder, you can
open it again.
To disconnect the MOBIC from a network computer or network folder:
1. Open the “Network Resources” program.
2. Select the network connection to be deleted.
3. Tap on “Disconnect”.
4. Then tap on “OK”.
5. The network connection has been removed from your network folder.