Siemens CP 243-1 IT Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 134

background image

Installation and Commissioning

03/03

CP 243-1 IT

J31069-D0429-U001-A0-7618

52

3.4

Installation on a Standard DIN Rail

What to do/steps

1. Open the snap catch and hang in the CP 243-1 IT on the DIN rail to the right

next to or above the CPU.

2. Close the snap catch to secure the CP 243-1 IT to the rail. Make sure that the

catch is snapped in correctly and the device is firmly secured to the rail.

Note

In environments in which strong vibration occurs or the devices are installed verti-
cally, it may be necessary to use standard DIN rail stoppers to keep the devices
from slipping on DIN hat rail.

3. Insert the ribbon cable of the CP 243-1 IT in the connection provided under the

front covering flap of the adjacent module or the S7-200 CPU. The shape of the
plug connector prevents it from being incorrectly inserted.

4. Connect the grounding terminal.

Connect the grounding terminal of the CP 243-1 IT with the next available
ground to obtain the highest possible interference immunity. We recommend
connecting all grounding terminals individually. Use lines with a cross section of
1.5 mm

2

for this.

5. Connect the power supply.

6. Connect the Ethernet cable.

The transmission medium is a 2 x 2-core, twisted pair, shielded line with a ripple
resistance of 100 Ohm. The transmission properties of this line must meet cate-
gory 5 requirements (Cat5Cable). The maximum length of the connection be-
tween terminal and network components (link segment) is limited to 100 m with
the components defined in IEEE802.3.

The RJ45 plug connector on the CP 243-1 IT is shielded so that, in combination
with a shielded Ethernet cable, a continuous cable shield is created which en-
sures interference-free Ethernet transmission. The shield of the RJ45 plug con-
nector is connected via the grounding terminal of the CP 243-1 IT.

We recommend shielding and grounding the Ethernet connection as described
in the document on SIMATIC NET twisted pair and fiber optic networks.

Installation is complete.

Note

Keep the front flap of the CP 243-1 IT closed during operation.
During installation, make sure that the upper and lower ventilation slits of the mod-
ule are not obstructed and good ventilation is possible.

«
...
50
51
52
53
54
...
»

Содержание CP 243-1 IT







































































































































Отзывы:

Нет отзывов

Похожие инструкции для CP 243-1 IT

Бренд: Omnia Страницы: 102

Бренд: Garmin Страницы: 2

Бренд: Xinje Страницы: 76

Бренд: Paradyne Страницы: 20

Compshere 3000 Series

Бренд: Paradyne Страницы: 2

RocketLink-G 3088/I

Бренд: Patton electronics Страницы: 61

Бренд: ESD Страницы: 28

Бренд: Keithley Страницы: 71

Бренд: Cypress Semiconductor Страницы: 26

NC-MCO - TECHNICAL

Бренд: Crest Audio Страницы: 2

Бренд: ADLINK Technology Страницы: 86

Бренд: Freescale Semiconductor Страницы: 42

Бренд: IBM Страницы: 168

Broadband 700 MHz

Бренд: Alcatel-Lucent Страницы: 8

Бренд: NEC Страницы: 26

Бренд: SilverStone Страницы: 12

Selenio SNP-GW-3GX32

Бренд: Imagine communications Страницы: 153

WIRELESS-G CARDBUS PC CARD - GUIDE D

Бренд: Hawking Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды