Siemens CP 243-1 IT Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 134

background image

03/03

Features and Functions

CP 243-1 IT
J31069-D0429-U001-A0-7618

25

2.3.3 E-Mail

How it works

The SMTP protocol controls the transmission of e-mails. An e-mail consists of one
or two address fields, a subject field and a field for the actual text message.

The text message consists of ASCII characters. The text may contain placeholders
for variables which reference a data value of the local S7-200 system. When the e-
mail is sent, the CP 243-1 IT reads each such value from the local S7-200 CPU
and inserts it in the desired format at the specified location in the message. The CP
243-1 IT makes it possible to send e-mails preconfigured by a user program to an
e-mail server already specified via IP address and an port during the configuration
phase. The e-mail server then sends the e-mail to the e-mail recipient specified in
the address field of the e-mail.

The e-mail server specified in the configuration by an IP address and a port num-
ber must be located in the subnetwork of the CP 243-1 IT or be able to be ac-
cessed via a gateway. If this e-mail server cannot be accessed, the e-mail is sent
to a substitute e-mail server which is also specified when the CP 243-1 IT is con-
figured. If this substitute e-mail server is also not accessible, an appropriate error
message is generated.

Caution

The CP 243-1 IT only monitors whether an e-mail could be delivered to the config-
ured e-mail server. It is unable to tell whether this e-mail was forwarded to and
read by the specified recipient.

Note

Since memory areas of the S7-200 CPU must be read out in accordance with the
configuration when an e-mail is sent, a reset in between or power failure of the S7-
200 CPU may cause the e-mail transmission to be terminated altogether before it
can even be sent.

This means that a message that an S7-200 CPU reset has occurred cannot be
sent via e-mail.

The CP 243-1 IT does not support the receipt of e-mails. The e-mails and the ad-
dress parameters of the e-mail server are configured by STEP 7 Micro/WIN 32.

«
...
23
24
25
26
27
...
»

Содержание CP 243-1 IT







































































































































Отзывы:

Нет отзывов

Похожие инструкции для CP 243-1 IT

Бренд: Garland Страницы: 4

Бренд: Raritan Страницы: 4

Бренд: FDI Страницы: 2

Through Hole Power Inductors 1411

Бренд: Delta Electronics Страницы: 1

2000 IDU Series

Бренд: EMS Страницы: 52

Бренд: Supero Страницы: 53

Бренд: PairGain Страницы: 80

Бренд: 2N Telekomunikace Страницы: 67

Бренд: Extron electronics Страницы: 19

Бренд: Xinje Страницы: 76

Бренд: Juniper Страницы: 6

Бренд: Multi-Link Страницы: 31

Бренд: MicroNova Страницы: 113

Q-SYS QIO-GP8x8

Бренд: QSC Страницы: 13

Бренд: Primera Страницы: 82

Бренд: ICP DAS USA Страницы: 8

Matrix 6H303-48

Бренд: Enterasys Страницы: 90

Бренд: MSI Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды