Siemens CP 243-1 IT, Техническое руководство

Страница: 132 / 134

Timeouts 03/03
CP 243-1 IT
J31069-D0429-U001-A0-7618
132
On backplane bus:
Meaning Action for Timeout Fixed Set Time
in Seconds
Maximum time for one communica-
tion cycle between the CP 243-1 IT
and the S7-200 CPU via the back-
plane bus
Note:
Three cycle times are usually re-
quired per read/write job with client.
One cycle time with server. Long
execution times of the read/write jobs
must be expected with user pro-
grams which require an extreme
amount of time and simultaneous
communication with many channels.
Job rejected. CP 243-1 IT performs a
restart. 10 (per cycle)
Timeout for the successful transmis-
sion of CDB/NDB when CP boots
CP 243-1 IT performs a restart. 120
Time after which the booting S7 CPU
must have detected the CP 243-1 IT
physically CP 243-1 IT performs a restart. 1
Maximum time until the configured e-
mail server must have accepted a
request for the establishment of a
connection Connection is not established. The
CP 243-1 IT reports an error. 20
Maximum time until the configured
FTP server must have accepted a
request for the establishment of a
connection Connection is not established. The
CP 243-1 IT reports an error. 20
Table 34 Timeouts on the backplane bus
On the user interface:
Meaning Action for Timeout Fixed Set Time
in Seconds
Time after which an error or mes-
sage code is returned by the
ETHx_CTRL subprogram with the
Error return parameter/is reset by the
CP 243-1 IT at the latest.
This code is also always located in
the SM memory area used by the CP
243-1 IT in the two bytes with the
offset 20 and 21. Error or message code is set to 0. 60