Siemens 9410DC, Руководство пользователя, Страница: 75 / 172

Communications 9410 series
COMTRADE
Your meter can automatically generate COMTRADE files and store them on the
meter’s internal FTP site.
COMTRADE stands for COMmon format for TRAnsient Data Exchange defined by IEC
60255-24 edition 2001-05, and defines a common format for power quality event
(disturbance) data in order to simplify retrieval, analysis and exchange of disturbance
data between multiple sources and vendors.
The format of your meter’s COMTRADE files is as defined by IEC 60255-24 edition
2001-05.
COMTRADE is configured as part of the default waveform recording but not enabled
from the factory.
COMTRADE can be used in conjunction with IEC 61850.
NOTE: If you are generating COMTRADE waveform information, the associated
waveform recorders cannot be modified unless COMTRADE is disabled. If the
waveform recorders are not configured identically, COMTRADE waveform information
will not be generated.
See the COMTRADE and ION technology technical note, available from
www.usa.siemens.com/pds, for detailed information about COMTRADE file formats
and implementation.
Related Topics
• FTP
Configuring COMTRADE waveform recording using ION Setup
You can enable and configure COMTRADE waveform recording using ION Setup.
COMTRADE is configured as part of the default waveform recording but not enabled
from the factory.
Your meter’s COMTRADE files’ format complies with the standard defined by IEC
60255-24 edition 2001-05.
COMTRADE records are stored as read-only files on your meter’s internal FTP server,
and are deleted when you perform a Master reset of the meter.
NOTE: To configure waveform recording, you must disable COMTRADE, configure
waveform recording, and then enable COMTRADE. COMTRADE records are not
generated if the waveform recorders have inconsistent settings.
1. Start ION Setup.
2. Open the Setup Assistant for your meter.
3. Navigate to Power Quality and click the COMTRADE .
7EN05-0336-01 75