Siemens 9410DC Скачать руководство пользователя страница 26

Страница: 26 / 172

9410 series

Meter display

Related Topics

•

Revenue locking

Alarm icon

The alarm icon indicates the highest level and state of alarms detected by your meter.

For example, if the meter detects a low priority and a high priority active alarm, the
alarm icon indicates a high priority active alarm.

NOTE:

Alarms can only be viewed and acknowledged through your meter’s display.

Icon

Description

Active alarm indicator:

•

Red: high priority alarm state detected

•

Yellow: medium priority alarm state detected

•

Blue: low priority alarm state detected

The alarm indicator flashes until you acknowledge the alarm.

The alarm indicator changes to the historic alarm indicator of the appropriate level
when the alarm state is no longer detected by the meter.

NOTE:

Your meter’s display backlight flashes for unacknowledged high priority

active alarms.

Unacknowledged historic alarm indicator:

•

Red: unacknowledged high priority historic alarm

•

Yellow: unacknowledged medium priority historic alarm

NOTE:

Low priority historical alarms are not indicated.

The active alarm indicator changes to the historic alarm indicator of the appropriate
level when the alarm state is no longer detected by the meter.

No active or unacknowledged high or medium priority historic alarms

Related Topics

•

Alarms overview

Alarm and status LED indicators

Your meter has alarm and status LEDs on the display.

These LEDs cannot be configured for other uses.

LED

Description

Status

Off: unpowered

Steady green: normal operation

Flashing red: no communications (remote display only)

Steady red: firmware upgrade required (remote display only)

Flashing red/green: startup or firmware upgrade sequence in progress

Alarm

Off: no active or unacknowledged historic alarms

On: acknowledged active alarm

Flashing: active alarm

NOTE:

Your meter’s display backlight flashes for unacknowledged high priority

active alarms.

7EN05-0336-01

Содержание 9410DC













































































































































































Результаты поиска

Содержание 9410DC

Отзывы:

Siemens 9410DC, Руководство пользователя, Страница: 26 / 172

Результаты поиска

Содержание 9410DC

Отзывы: