Siemens 9410DC Скачать руководство пользователя страница 11

Страница: 11 / 172

Meter overview

9410 series

Measured parameters

Energy

Your meter provides bi-directional 4-quadrant energy metering.

Your meter provides active, reactive and apparent energy values.

•

kWh, kVARh, kVAh delivered and received

•

kWh, kVARh, kVAh net (delivered - received)

•

kWh, kVARh, kVAh total (del received)

•

Volt-squared-hours and amp-squared-hours

Energy parameters can be logged automatically on a programmed schedule.

All energy values represent the total for all three phases.

Demand

Your meter supports several demand calculation methods, including block, rolling
block, synchronized and predicted demand.

It can measure demand on any instantaneous value and record peak (maximum) and
minimum demand with time and date information.

•

kW, kVAR, kVA demand

•

kW, kVAR, kVA peak demand

•

Amps, Volts demand

7EN05-0336-01

Содержание 9410DC













































































































































































Результаты поиска

Содержание 9410DC

Отзывы:

Siemens 9410DC, Руководство пользователя, Страница: 11 / 172

Результаты поиска

Содержание 9410DC

Отзывы: