Siemens 9410DC Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 172

Siemens 9410DC Скачать руководство пользователя страница 2

9410 series

Safety information

Important information

Read these instructions carefully and look at the equipment to become familiar with the
device before trying to install, operate, service or maintain it. The following special
messages may appear throughout this bulletin or on the equipment to warn of potential
hazards or to call attention to information that clarifies or simplifies a procedure.

The addition of either symbol to a “Danger” or “Warning” safety label indicates that an
electrical hazard exists which will result in personal injury if the instructions are not
followed.

This is the safety alert symbol. It is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible injury or
death.

DANGER

DANGER

indicates a haz ardous situation which, if not avoided, will result in death

or serious injury.

WARNING

WARNING indicates a ha zardous situation which, if not avoided,

could result in

death or serious injury.

CAUTION

CAUTION indicates a haz ardous situation which, if not avoided,

could result in

minor or moderate injury.

NOTICE

NOTICE is used to addre ss pra ctice s not re la te d to phys ica l injury.

Please note

Electrical equipment should be installed, operated, serviced and maintained only by
qualified personnel. No responsibility is assumed by Siemens Industry for any
consequences arising out of the use of this material. A qualified person is one who has
skills and knowledge related to the construction, installation, and operation of electrical
equipment and has received safety training to recognize and avoid the hazards
involved.

2

7EN05-0336-01

«
1
2
3
4
...
»

Содержание 9410DC













































































































































































Отзывы:

Нет отзывов