Siemens 9410DC, Руководство пользователя, Страница: 42 / 172

9410 series Security
Related Topics
• Protocols, ports and connections
Password setup
It is strongly recommended that you change your meter’s display (front panel)
password from the default value of 0 (zero).
If your meter’s user access information is lost, you must return the meter to the factory,
where your meter is reset to its factory defaults and all logged data is lost.
NOTICE
DATA LOSS
Failure to follow these instructions can result in equipment damage.
Record your device's user and password information in a secure location.
Screen title Parameter Values Description
Password Setup Password 0 to 99999999 Sets the password that must be entered
in order to configure parameters using
the meter’s display
NOTE: This is also the password used
to access the meter’s webpages when
standard security is enabled
Changing your meter’s display password using the display
You can change your display password using your meter’s display.
NOTE: The display password is also used as the webpage password if standard
security is enabled.
1. Go to Setup Menu > Password Setup .
2. Configure your meter’s display password.
Configuring standard security using ION Setup
You can fully configure standard and advanced security on your meter using ION
Setup.
In order to change security settings, you must be logged into ION Setup with an
appropriate ION Setup user level. You must also have the appropriate meter-level
security access to configure meter security.
1. Start ION Setup.
2. Open the Setup Assistant for your meter.
3. Navigate to Security . Select Security Mode and click Edit . The open dialog box
appears.
42 7EN05-0336-01