Siemens 6GK1411-1AC00, Руководство по эксплуатации

Страница: 56 / 150

Configuration
4.6 Interface configuration
SIMATIC CC7
56
Operating Instructions, 10/2019, C79000-G8976-C503-02
● Software version
Current firmware version of the device
● CLP
Shows whether a CLP is currently inserted.
Process interface (P2)
The parameter group displays the current address data of the P2 interface.
● MAC address
● IPv4
Address parameters, Default router
Cloud interface (P1)
The parameter group displays the current address data of the P1 interface.
● MAC address
● IPv4 / IPv6
Address parameters, Default router
DNS server
The parameter group shows the IPv4 addresses of up to two configured DNS servers.
4.6 Interface configuration
4.6.1 Ethernet
In this tab, you configure the address data of the Ethernet interfaces of the device.
Interface and factory default addresses
You configure the following interfaces on the web page:
● Process interface (P2)
The interface (P2) is used for connecting to the subnet of the process stations.
● Cloud interface (P1)
The interface (P1) is used for connecting to the Internet or to a router over which the
broker or the network with OPC UA clients can be reached.
The device supports IPv4 addresses, and for cloud access also IPv6 addresses.
The following address data is preset in the factory: